Key takeaways
- Total and split capacity: Makers list total cubic footage along with the fridge-to-freezer split; a larger total doesn’t always mean more usable fridge space if the split favors the freezer side heavily.
- Door swing and width clearance: Side by side doors swing open at a narrower angle than full-width single doors, which helps in galley kitchens, but the combined width of the unit itself is often wider than comparable top or bottom freezer models.
- Ice and water dispenser type: External dispensers add convenience but take up some interior door storage space and require a water line connection; internal ice makers without an external dispenser preserve more usable interior space.
- Adjustable and spill-proof shelving: Shelves that slide, fold, or adjust in height help accommodate taller items, and spill-proof shelf edges catch leaks before they drip to lower shelves.
- Energy efficiency rating: Side by side units often use more energy than comparable bottom-freezer models due to the dispenser and larger door-opening footprint; checking the stated energy rating helps compare running cost expectations.
- Counter-depth versus standard-depth sizing: Counter-depth models sit flush with surrounding cabinets for a built-in look but sacrifice some interior capacity compared to standard-depth units of similar width.
A full side by side fridge freezer suits households that want wide shelves accessible at eye level in both the fridge and freezer compartments without bending down, and the right pick depends on kitchen width available for door swing, ice and water dispenser preference, and total capacity needed. Side by side units split fridge and freezer vertically into two narrower doors rather than stacking them, trading some shelf width for easier access to frozen items.
Because both compartments run full height, side by side models tend to offer more total freezer space than a comparable top-freezer or bottom-freezer unit, while fridge shelves are narrower, which affects how well they fit wide platters or sheet pans. Buyers coming from a different fridge style should expect to rearrange how they store wide items.
What to look for in a full side by side fridge freezer
- Total and split capacity: Makers list total cubic footage along with the fridge-to-freezer split; a larger total doesn’t always mean more usable fridge space if the split favors the freezer side heavily.
- Door swing and width clearance: Side by side doors swing open at a narrower angle than full-width single doors, which helps in galley kitchens, but the combined width of the unit itself is often wider than comparable top or bottom freezer models.
- Ice and water dispenser type: External dispensers add convenience but take up some interior door storage space and require a water line connection; internal ice makers without an external dispenser preserve more usable interior space.
- Adjustable and spill-proof shelving: Shelves that slide, fold, or adjust in height help accommodate taller items, and spill-proof shelf edges catch leaks before they drip to lower shelves.
- Energy efficiency rating: Side by side units often use more energy than comparable bottom-freezer models due to the dispenser and larger door-opening footprint; checking the stated energy rating helps compare running cost expectations.
- Counter-depth versus standard-depth sizing: Counter-depth models sit flush with surrounding cabinets for a built-in look but sacrifice some interior capacity compared to standard-depth units of similar width.
Picks by use case
Best for narrow kitchens
Side by side models are a common choice specifically because their narrower door swing works well in galley kitchens or tight spaces where a wide single door wouldn’t fully open. Buyers in this situation should still measure the total width of the unit itself, since side by side fridges can be wider overall even with a smaller door swing arc.
Best for families needing frozen food capacity
Models with a more generous freezer-side split suit households that stock up on frozen food, batch-cook, or buy in bulk, since the full-height freezer door gives eye-level access to a deep compartment without bending. Pull-out freezer bins or baskets in these models help keep items organized rather than stacked loosely.
Best for built-in, flush-with-cabinet looks
Counter-depth side by side models suit kitchens where a flush, built-in appearance matters more than maximizing interior volume, since these models don’t protrude past standard counter and cabinet depth. Buyers choosing counter-depth should expect somewhat less usable interior space than a standard-depth unit of the same width.
Best for households wanting dispenser convenience
Models with an external ice and water dispenser on the freezer door suit households that use ice and filtered water frequently and want it without opening a door. This convenience does require a water line hookup during installation and periodic filter replacement per the manufacturer’s schedule.
At a glance comparison
| Type | Best for | Key stated specs | Limits |
|---|---|---|---|
| Standard-depth side by side | Narrow kitchens needing max capacity | Larger total cubic footage, protrudes past standard cabinet depth | Doesn’t sit flush with cabinetry |
| Counter-depth side by side | Built-in, flush cabinet look | Shallower depth matching counters, moderate capacity | Less usable interior volume than standard depth |
| Freezer-heavy split model | Bulk frozen food storage | Larger freezer-side split, pull-out bins common | Comparatively less fresh-food fridge space |
| Dispenser-equipped model | Frequent ice and filtered water use | External ice/water dispenser, water line required | Reduces some interior door storage space |
Pick X if decision table
| Situation | Pick this type |
|---|---|
| Your kitchen is narrow and door swing clearance is tight | Standard-depth side by side (check total width carefully) |
| You want a flush, built-in cabinet appearance | Counter-depth side by side |
| You batch-cook or buy frozen food in bulk | Freezer-heavy split model |
| You use ice and filtered water daily | Dispenser-equipped model |
Fit and compatibility notes
Measure the full width, depth, and height of the installation space, including clearance for both doors to swing open past 90 degrees for shelf access, since side by side units need adequate space on both sides depending on kitchen layout. Confirm doorway and hallway clearance for delivery, as side by side units are often wider than the doorways in older homes, which can require door removal during delivery. If choosing a dispenser model, confirm there’s an accessible water line or that one can be run to the installation location, and check the manufacturer’s recommended filter replacement interval for ongoing cost. Counter-depth buyers should compare the listed interior cubic footage against a standard-depth model of similar width to understand the real capacity tradeoff before buying.
Alternatives to consider
Bottom-freezer fridges: These place fresh food at eye level in a single wide door with the freezer in a pull-out drawer below, often giving wider fridge shelves than a side by side at a similar total capacity.
French door fridges: A hybrid style with two narrow fridge doors on top and a freezer drawer below, offering a wide-open fridge view like a single door while keeping a narrower door swing than a full-width door.
Top-freezer fridges: A simpler, typically more budget-friendly layout with the freezer on top and fridge below, trading eye-level freezer access for a straightforward design and often better energy efficiency.
Frequently Asked Questions
Do side by side fridges use more energy than other styles?
Side by side models often have a higher stated energy use than comparable bottom-freezer models, partly due to the dispenser and the larger combined door-opening footprint affecting both compartments at once. Checking the specific energy rating listed by the manufacturer for each model is the most reliable way to compare running costs. Energy-efficient compressor technology in newer models has narrowed this gap somewhat compared to older designs.
Will my existing sheet pans and pizza boxes fit on side by side shelves?
Side by side fridge shelves are generally narrower than those in a bottom-freezer or French door model of similar total width, which can make fitting wide sheet pans or large pizza boxes awkward. Checking the stated interior shelf width against your typical wide items before buying helps avoid this common frustration. Some models include a wider shelf or a shelf that can be removed to create more vertical clearance for tall or wide items.
How long does a water filter in a dispenser model typically last?
Manufacturers typically state a filter replacement interval, commonly expressed in months or gallons dispensed, and most dispenser-equipped fridges will indicate on a control panel when a filter change is due. Following the manufacturer’s recommended interval helps maintain proper water flow and filtration performance. Skipping scheduled filter changes can reduce dispenser flow rate over time.
Can a side by side fridge be installed flush against a wall on both sides?
Most side by side models need clearance on at least one side for the door to swing open fully enough to remove shelves or bins, so installing flush against walls on both sides can limit usability even if the fridge physically fits. Checking the manufacturer’s recommended side clearance in the installation manual helps avoid this problem. Some models are designed with reduced clearance needs, so comparing specs across models matters if space is tight.
Is counter-depth worth the reduced interior capacity?
Counter-depth is primarily a kitchen design choice for a flush, built-in appearance, and whether it’s worth the reduced capacity depends on how much the buyer values that look versus maximizing storage space. Measuring current usage against the counter-depth model’s stated interior cubic footage helps make this tradeoff concrete before buying. Households with high storage needs may be better served by a standard-depth unit even if it protrudes slightly past the counter line.
How often should the freezer and fridge be defrosted or deep cleaned?
Most modern side by side models use automatic defrost systems that eliminate the need for manual defrosting under normal conditions, though the manufacturer’s manual should be checked for any model-specific guidance. A deep clean of shelves, bins, and door seals every few months helps maintain efficient sealing and reduces odor buildup. Checking door gaskets periodically for wear also helps the unit maintain its rated energy efficiency over time.