Updated Nov 19, 2026· 5 min read

Key takeaways

  • The MTM Case-Gard ACR7-18 ammo crate offers 890 cubic inches of sealed, stackable, lock-ready storage for a simpler ammunition management system.

An ammunition management system does not need software, sensors, or a complicated shelving project. For many lawful owners, the real problem is simpler: factory boxes scattered across a closet floor, mixed calibers sharing one open bin, and no quick way to see what is stored where. A single rigid crate with a sealed lid turns that clutter into one organized container, and the MTM Case-Gard ACR7-18 Ammo Crate Utility Box is built around exactly that idea. It is a deep, single-compartment crate made for boxed or bulk ammunition storage, with a water-resistant seal, stacking ridges, and padlock tabs for basic security.

This review looks at the ACR7-18 as a storage product only. It covers the published specifications from MTM and the Amazon listing, explains who this kind of crate suits and who should skip it, and compares it in general terms with the alternatives most owners consider, such as surplus-style steel cans, small flip-top round boxes, and soft range bags. Storage needs vary, and local rules for ammunition storage vary as well, so the right container is the one that fits both the collection and the rules that apply where it is kept.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The MTM Case-Gard ACR7-18 is a deep, single-compartment polypropylene crate for boxed or bulk ammunition storage. Its O-ring tongue-and-groove lid is water resistant but not submersible, two latches and double padlock tabs add basic security, and molded ridges let crates stack. It suits owners consolidating several boxes into one sealed, carry-ready container.

Key Specs

Specification Detail
Brand MTM Case-Gard
Model ACR7-18
Product type Ammo crate utility box
Material High-impact polypropylene
Color Army Green
Exterior dimensions 17.2 x 10.7 x 9.2 inches
Interior dimensions 12.4 x 8.4 x 8.5 inches
Storage volume 890 cubic inches
Load capacity Up to 65 pounds of gear
Compartments 1
Caliber compatibility Not caliber-specific; designed for boxed or bulk ammunition storage
Round capacity not stated
Lid seal Tongue-and-groove O-ring; water resistant, non-submersible
Closure Two side-mounted latches with double padlock tabs
Handles Two side handles
Tie-down points Four
Item weight not stated
Country of origin Made in USA

The interior is one open cavity rather than a grid of individual cells, so organization inside the crate comes from the factory boxes themselves or from smaller boxes placed inside it. MTM rates the crate to carry up to 65 pounds of gear, and the two side handles are positioned for lifting a loaded crate without the lid latches getting in the way. The four tie-down points on the sides are meant for securing the crate in a vehicle or on an ATV during transport.

Who It’s For

The ACR7-18 fits owners who keep several factory boxes of the same or different calibers and want them consolidated in one sealed, stackable container instead of spread across shelves and floor space. The 890 cubic inches of interior volume and the tall 8.5-inch interior height accept standard retail boxes standing upright, which keeps labels visible and makes inventory checks a matter of opening one lid. It also suits people who move stored ammunition between a home storage area and a vehicle, because the handles, latches, and tie-down points are all designed around carrying and securing a loaded crate. Owners building a small stack of matching crates for different calibers will appreciate the molded-in stacking ridges, which keep a column of crates aligned instead of sliding.

Who Should Skip It

Skip this crate if you need individual slots for loose rounds. The single open compartment does not separate cartridges, so reloaders and range users who sort loose ammunition by load are better served by small flip-top boxes with molded cells. Also skip it if you need a container rated for submersion or long-term outdoor exposure: the O-ring seal is water resistant for dry storage, and MTM states plainly that the crate is non-submersible. Anyone who needs certified, lockable storage that satisfies a specific legal standard should check the applicable requirements first, because padlock tabs on a plastic crate are a basic deterrent, not a rated safe. Finally, if your storage space is shallow shelving, measure before ordering, since the crate stands 9.2 inches tall on the outside.

How It Compares With Typical Alternatives

Against surplus-style steel cans, the ACR7-18 trades metal construction for lighter polypropylene, a wider opening, and molded stacking ridges. Steel cans seal well and have a long service history, but their narrow mouths make it harder to read box labels inside, and they are usually smaller per container. Against small flip-top round boxes, the crate holds far more in one place but gives up per-round organization; the two product types solve different problems and are often used together, with small boxes inside a larger crate. Against soft range bags, the crate offers a rigid shell, a sealed lid, and stackability that fabric cannot match, while a bag remains easier to carry for a single range session. As an ammunition management system, the crate works best as the fixed home base of a setup: one sealed, labeled, lock-ready container per caliber group.

Frequently Asked Questions

Is the ACR7-18 waterproof?

No. MTM describes the tongue-and-groove O-ring seal as water resistant for dry storage and states that the crate is non-submersible. It is designed to shed splashes and damp air in indoor or vehicle storage, not to survive being underwater.

Does the crate lock?

The lid closes with two strong latches and has double padlock tabs, so owners can add their own padlocks for basic security. Padlocks are not stated as included, and the tabs provide a deterrent rather than rated, certified security.

How much ammunition does it hold?

MTM does not publish a round count for this crate. Capacity is given as 890 cubic inches of interior volume and a carrying rating of up to 65 pounds of gear, so the number of boxes that fit depends on the caliber and box size being stored.

Can several crates be stacked?

Yes. The lid and base have molded-in stacking ridges designed so crates can be stacked high while staying aligned. The four side tie-down points also let a crate be secured to an ATV or truck bed for transport.

Final Verdict

The MTM Case-Gard ACR7-18 is a straightforward, well-specified storage crate: one deep polypropylene compartment, a water-resistant O-ring lid, two latches with double padlock tabs, strong side handles, and a stackable footprint. It is not a precision organizer for loose rounds and it is not submersible, but as the central container of a simple ammunition management system it covers the essentials: consolidation, dry storage, basic lockability, and easy transport. Owners who store ammunition in factory boxes and want one sealed crate per caliber group should find the format practical and durable.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
MTM Case-Gard ACR7-18 Ammo Crate Review for StorageCheck price on Amazon